General Description
Polyolefin adhesive (Uvalam PP-332) is a two-part (10:1 ratio by volume) acrylic- based plastic bonder, with working time of between 4 to 6 minutes, and fixture time of about 90 minutes. It is effectively bonds polyolefin substrates (PP, PE, PVDF, PTFE...) with little to no surface preparation and no primers required.
The off-white mixed adhesive is resistant to most automotive and industrial solvents, including ethylene glycol, brake fluid, power steering fluid and iso-pentane. It will give assembly engineers an alternative bonding technology for joining low surface energy thermoplastics such as polypropylene or polyethylene.
More, It can be used to bond dissimilar plastic substrates (polypropylene, polyethylene, polycarbonate, and PMMA), metals (carbon steel, stainless steel and aluminum), or fiber-reinforced plastics with a minimum of surface preparation to reduce labor costs and production cycle times.
Uvalam Polyolefin adhesive provides an alternative bonding technology to mechanical assembly or solvent welding, and it can replace screws, rivets, plastic welding. In addition, it produces a bond with excellent resistance to water and humid environments.
Performance benefits
|
● Bonds dissimilar substrates |
|
● Structurally Bond Polyolefins |
|
● One step : no surface pre-treatment or primer required |
|
● Very good chemical resistance |
|
● Low exotherm – less surface distortion |
|
● Convenient and easy to dispense by gun |
|
● Solvent-free Adhesive System |
|
● Room temperature cure |
|
● Excellent water and humidity resistance |
EXCELLENT RESISTANCE TO AUTOMOTIVE FLUIDS
|
Ethylene Glycol |
Brake Fluid |
Power Steering Fluid |
Iso-Pentane |
Recommended substrate
|
Potential Primary Surfaces |
Polypropylene (PP), Polyethylene (PE, HDPE, LDPE) PTFE, PVDF... |
|
Potential Secondary Surfaces |
Fiber Reinforced Plastic (FRP) ,PVC, Polycarbonate (PC), ABS, Wood, Acrylic (PMMA) Aluminum, Polystyrene, Glass, Concrete Thermoplastic Elastomers (TPE) Metals |
|
Not Recommended Surfaces |
Nylons, Silicone Surfaces, Polyimide Surfaces Containing Mold-Release Agents Substrates that contain oils and anti-stats. |
Adhesive Characteristics
|
Characteristics |
Part A (Adhesive) |
Part B (Activator) |
Mix (Part A + B) |
|
Color |
Off white |
Clear |
Off white |
|
Mix ratio by volume |
10 |
1 |
/ |
|
Mix ratio by weight |
9.80 |
1 |
/ |
|
Density, g/cc |
1.05 |
1.03 |
1.04 |
|
Density, lb/gallon |
8.75 |
8.56 |
8.70 |
|
Viscosity, cps |
9,000 |
10,000 |
/ |
Typical physical properties @ 75°F (24℃)
|
Substrates |
Lap Shear Strength (Unit: psi ) |
Failure |
|
Polypropylene (PP) |
1075 |
Substrate Failure/Break |
|
Polyethylene (PE) |
1100 |
Adhesive Failure |
|
Polycarbonate |
850 |
Substrate Failure/Break |
|
Plexiglass (PMMA) |
950 |
Substrate Failure/Break |
|
Copper (1/16" thick) |
2275 |
Cohesive Failure |
|
Carbon Steel |
2050 |
Adhesive Failure |
|
Aluminum (1/16" thick) |
2275 |
Cohesive Failure |
|
304 Stainless Steel (1/32" thick) |
2300 |
Cohesive Failure |
Typical reactivity properties @ 75°F (24°C)
|
Product |
Working Time (minutes) |
Fixture Time (minutes) |
|
Polyolefins adhesive (UVALAM PP-332) |
5 to 6 |
90 to 240 minutes |
Cartridge packing size:
10:1 dual PBT cartridge 50ml
Storage Condition & Shelf life
For maximum shelf life, store cartridges and bulk containers at 40°F (4°C) or below.
When stored at the recommended temperatures in the original unopened containers, this product has a shelf life of 6-8 months from date of shipment.
📞📞📞
Please contact us for more details on WhatsApp: Http://wa.me/008618850500512