General Description
UVALAM UV-G is transparent One-component, uv curing adhesive. Curing is effected by UV rays.
Bonding Application Recommendation:
Uvalam UV-G is widely used general lamination of glass and Acrylic, with safe, bulletproof and/or Decoration purpose.
Typical Technical Data:
|
Before curing |
||||||
|
Material Base |
Colour |
Viscosity |
Density |
Flash Point |
Viscosity |
Shelf-Life |
|
Acrylic resin |
Clear & Transparent |
Fluid and Pourable |
0.95-1.00 (Kg/litre) |
23 (°C) |
50-200 (Cps) |
12 Months |
|
After curing |
||||||
|
Light Transmission Rate |
Elongation at Break |
Tensile Strength |
Shore A Hardness |
Refractive Index |
Shrinkage Rate |
Bonding Strength |
|
93%-95% |
380%(25°C); 362%(-40°C) |
6.0MP(25°C); 6.8MP(-40°C) |
80 |
1.5 |
6 (%) |
6.00 MPa |
Packing:
25KGS per plastic drum, 12 drums per plywood box.
STORAGE
Please store it in a dry place, away from sources of heat and protected from frost, at a temperature of 15 to 30°C.
In hot countries the resin should be stored in an air-conditioned room or at least sufficiently cooled.
Special care must be given that no moisture comes in contact with the adhesive, as this can negatively influence performance (adhesion).
Shelf Time
12 months since the manufacturing date under our storage advice.
📱📱📱
whatsapp: 0086 18850500512