Top Hybrid Adhesive Manufacturer and Wholesale Supplier from China

Two-part 2:1 epoxy structural adhesive offering outstanding shear and peel adhesion, high levels of durability and good strength along with high impact and fatigue resistance to meet demanding bonding challenges. can replace mechanical fasteners, screws, rivets and spot welds in many applications.

Two-component 2:1, toughened, medium viscosity, industrial grade, epoxy structural adhesive with a medium working life. Typical applications include general purpose industrial applications requiring moderate work life with high performance on a wide variety of plastics, metals, dry concrete or architectural materials.

Two-part 1:1 non-sagging methacrylate adhesive designed for structural bonding of thermoplastic, metal, and composite, for use on large marine structures where a very long open time product is needed.

GP-0416 MMA Structural adhesive, third generation, General-purpose, fast cure, two-part 1:1 methyl methacrylate structural adhesive for structurally bonding engineering plastics and composite assemblies with little to no surface preparation, and bonding metals without Primer needed.

Two-component 2:1, off-white, high viscosity industrial grade, epoxy Structural adhesive with extended work life. Typical applications include bonding nose cones in aerospace applications.

Quartz Stone Adhesive - High-quality adhesive for quartz stone installation.

Toughened, two-part 1:1, Clear epoxy structural adhesive, offering fast cure and machinability, also provides good strength along with high impact and fatigue resistance to meet demanding bonding challenges.

Two-part 10:1 non-sagging methacrylate adhesive designed for structural bonding of thermoplastic, metal, and composite assemblies, and with very good bond strength of SMC.

two-part 1:1 methacrylate adhesive designed for structural bonding of thermoplastic, metal, and composite assemblies with large structures where a moderate open time needed and combination of excellent fatigue endurance, outstanding impact resistance, and superior toughness. Non-sagging gel.

One component, water-thin, very fast curing solvent acrylic adhesive for quickly development of high strength, clear bond to many thermoplastic, especially Acrylic and polycarbonate sheet.

Acryic adhesive for undermount sink installation. Get professional quality and durability for sink installation.

clear, low VOC emission, water-thin, solvent cleaner, specifically formulated to remove grease, oil and dirt from the bonding surfaces of PVC, CPVC, ABS pipe and fittings.

UV and heating dual curing modified epoxy resin. Halogen-free. As a factory, we offer smart dual curing solutions for different application on different substrates.

Two part 1:1, toughened, medium viscosity, industrial grade epoxy adhesive with a medium working life. Once mixed, this epoxy cures at room temperature to form a flexible, gray bonding line with excellent resistance to shock and impact. When fully cured, this epoxy is resistant to a wide range of chemicals and solvents, and acts as an excellent electrical insulator.

Clear, two-component (10:1), reactive, high-strength adhesive, forming high strength joints in a few hours. The cemented joint retain high clarity, high strength and resistance to the effects of weathering and aging.